Friday, March 29, 2024
spot_img
spot_img

D-Link’s 2MP Bullet Full Colour Camera DCS-F2712-L1C

spot_img
spot_img
- Advertisement -

Advances in technology have allowed for major advancements in security camera quality, recording capability and, importantly, affordability. In modern times, security is of utmost importance and it is only imperative to have safety measures in place. You may need security cameras for personal use, for your home or office. Even public places like parks, shopping malls and restaurants need surveillance cameras.  Whether your workplace is commercial or industrial, you can benefit from installing security cameras on your property. 

2MP Bullet Full Colour Camera DCS-F2712-L1C camera by D-Link is an exception by itself due to its immense qualities. 

2MP full time color camera- It is 2MP full time color camera with 1/2.9″ CMOS Sensor. This 4 in 1 cameracqan work on  AHD/TVI/CVI/CVBS mode. It has 3.6mm Fixed Lens. The housing Material is plastic and up the Coaxial Control. Appointing security guards is a traditional practice, but with developing technology, a number of surveillance aids are made available. This safety measure is the most preferred one as it is convenient to install, and complements traditional measures as well

Good quality pictures– It supports 3D DNR and its 1/2.9″ CMOS Sensor Signal System PAL/NTSC Effective Pixels 1920(H) x 1080(V) Electronic Shutter AUTO/ 1/501/60-1/50,000sec Synchronization Internal Min. IIIumination Colour: 0.1Lux, 0 Lux with white light Video Frame Rate PAL/NTSC: 25/30fps

A strategically placed camera– A strategically placed camera can provide helpful evidence against a theft, crime or any untoward incident.

Sensor (CMOS ) – It can adopt 1/2.9″ CMOS Sensor which enables the high quality pictures. 

Auto Gain Control (AGC)- It has  Built-in auto gain control (AGC) circuit which enables the color camera to get high definition picture in low Lux condition. 

Scanning Mode NTSC or PAL mode. * 

Water Resistance IP66.

Unique picture quality:- The picture level direction have flowing interference ripples. May be caused by the power supply AC ripples, it needs to filter the wave of the power supply. Check the monitor and peripheral equipments used. 

Picture background color changes– The picture background color changes continuously. The fluorescent lamp’s electromagnetic field causes color roll. This is a proper phenomenon of the cameras. . Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can improve it. . Use power supply external sync. camera can solve it. The picture smear too mass . The power supply’s voltage unstable. Connecting cables not connect correctly or have driver. Fixing and using this model are convenient too. It is very good for you to apply to your CCTV system.

Thus we see that this camera allows the best of picture quality. 

- Advertisement -
spot_img
spot_img
spot_img
spot_img